Cruck Frames Earthbag Building
Green buildingEarthbag BuildingGeopolymer houseGreen homeTiny houseSitemapCONTACT US
Home  >>  Earthbag Building

Cruck Frames

Cruck frame house

Cruck frame house

Full cruck timber frame

Full cruck timber frame

Upper cruck timber frame

Upper cruck timber frame

Straight cruck timber frame

Straight cruck timber frame

“A cruck frame is one where the structure of the building depends on two or more ‘A-frames’ which go from the top of the building down to the ground. These frames are usually constructed of curved timbers (the cruck blades) using the natural shape of a tree and in many cases the tree is sliced long-ways down the middle so that whatever the shape of the curve the two sides are symmetrical. The two beams are joined together at the top by a ‘collar’ or tie-beam.

Cruck barns probably evolved in Anglo Saxon times and the earliest archaeological evidence comes from 4th century excavations in Buckinghamshire, but this building technique really came into its own in medieval times. Large halls were built in towns and villages and a large cruck barn also became a sign of an individual farm’s prosperity. The barns could be easily divided into sections or bays and threshing would have been done indoors.

The inverted ‘v’ shape has the advantage that the roof load is carried directly to the ground so that the wall frames can be made using a lighter construction and the walls also use the cruck frames for support. In medieval times the timber would have been felled using a two man saw and axe and then squared up with an adze. The procedure for construction would usually involve assembly on the ground and subsequent erection to a standing position. Once this is done the heaviest part of the operation is complete.

There are various types of cruck frames. Most seem to start at ground level whilst others start just below the wall plate level (raised cruck frames). In some constructions of wider buildings the frame starts at ground level but finishes at the collar which is a piece that joins the two cruck blades and this collar then supports the main roof timbers.”

Read the full article at the source: Woodlands

From the Cruck House website that shows each step of construction: “In Tudor times all straight oak timber was reserved for building ships. This left only curved or crucked oak, as shown opposite, for the building of properties such as houses and barns. This led to the development of the cruck house.”

Image source: The Cruck Barn
Image source: Timber (upper cruck frame and full cruck frame)
Image source: Woodlands

<< précédent        Article suivant >>

Cruck Frames, Earthbag Building,
Cruck Frames, Earthbag Building
LATEST ARTICLES, habitat social, Cruck Frames, Earthbag Building

- Pneumatically Impacted Stabilized (...)

- Thermo Hemp Insulation

- Sodium Silicate (Water Glass)

- Sandhenge

- Historical Cast Stone Formulas

- More Earthbag Testing

- Agricultural Ash Wastes

- Low-Calcium Fly Ash-based Geopolymer

- Health Clinic in Chiapas, Mexico

- Cement from Wastes in the Philippines

- Automated Fly Ash Brick Plant

- ‘Envelope’ Bag Closing Technique

- E-Crete™ Green Concrete (Geopolymer)

- 12×24 Homesteader’s Cabin – Free (...)

- Bricks Made from Fly Ash

- Bullet Resistance of Gravel

- Calcined Materials Have Higher (...)

- Rubber Gaskets for Waterproofing (...)

- Inspiration Green : Earthbag Constructio

- Geopolymer Dome Built on Airform

- Earthbag Winners : #1, 2, 3, 5, (...)

- Open Source Ecology : Geopolymers

- Laterite Geopolymer

- Sodium Carbonate

- Powdered Limestone